Chainline Contact

Every bike in the shop, on every phone.

Chainline is software for independent bike shops. It connects to Lightspeed, puts open work orders in front of every mechanic, and lets them film the bike instead of writing it up.

The Chainline work order list on a computer: seven bikes in the shop, each with its customer, bike, ready time, time in the shop, status and hook, with one job flagged as past its ready time.
A work order on a phone with a Record video button at the top.

Video

Show the customer what you see.

A mechanic opens the work order on the shop phone and talks through the bike on video, up to three minutes. Chainline writes the transcript and captions, and staff can send the customer a link that works for 24 hours.

  • Saved on the phone first, so weak shop Wi-Fi never loses a recording
  • Plays on any phone, with no app or account
  • Deleted 90 days after pickup unless a manager pins it
The record screen for work order 9101, a blue gravel bike, with a three minute limit.
A recorded video with captions and a timed transcript: the front tire is worn down and the chain is dry.

Messages In development

Every customer conversation in one thread.

Email a customer from the work order, and their reply comes back to the same thread. Texts join once the shop's own number is approved.

  1. Write to the customer from their work order.
  2. They answer from their own inbox.
  3. The reply lands in the thread, next to the job.
Email comes first. Texting follows once the carriers approve the shop's number.

Lightspeed

Connect Lightspeed once.

The owner signs in to Lightspeed R-Series and Chainline keeps a copy of the shop's data, such as customers, bikes, work orders and items. Open work orders refresh every 5 minutes, everything else every 15.

  • Search by customer, bike, work order or hook
  • Time in the shop and late jobs at a glance
  • Disconnect any time, then download your copy for 60 days before it's deleted
Settings, Lightspeed: connected, with counts of open work orders, customers, bikes, items and closed work orders copied, and each Lightspeed shop matched to a Chainline location.

Staff tools

The bench calculators, built in.

Trail, stem fit, spoke length, gearing, chain length, sag, rotor adapters and unit conversions, in the same app as the work order.

  • A shared counter computer: tap your name, enter your PIN
  • Home screen links to your vendor portals
  • Inbound shipments, checked off when they arrive
The Tools page on a phone, grouped into fit and geometry, and wheels and drivetrain calculators.
The trail calculator on a phone showing 61 mm of trail for a 72.5 degree head tube and 45 mm fork offset.

Want to see it in your shop?

Email support@getchainline.com and we will set up a time.